home *** CD-ROM | disk | FTP | other *** search
/ Ham Radio 2000 / Ham Radio 2000.iso / ham2000 / antenna / antennas / wire5.art < prev    next >
Text File  |  1994-05-26  |  2KB  |  39 lines

  1. SUBJECT: Wire antennas - part 5
  2.  
  3.  
  4. RHOMBICS
  5.  
  6.     I've talked about rhombics before and in this posting I 
  7. would like to discuss the rhombic for use in the UHF range. We 
  8. have hashed over rhombics in the HF range and many antenna 
  9. books discuss this antennas.  Most AROs don't have the room on 
  10. their property or do not have property to construct a rhombic 
  11. on.  There seems to be very little on rhombics for UHF work.
  12.  
  13.     After looking at some plans for a multi-element rhombic on 
  14. 70cm, I decided to modify the plans and came up with a 23cm, 12 
  15. element rhomboid. The official name is a dual hexamerous rhomboid 
  16. which is 2X6 rhomboid antenna.  The antenna has twelve elements, 
  17. with a gain of 33dBi, an is no bigger than a TV antenna!  On 
  18. 70cm, the antenna is 19-ft long (apprx) and below that I wouldn't
  19. bother unless you have the tower and room. Unless you can mount a 
  20. B-52 to a tower, 2m is out of the question.
  21.  
  22.     Testing on the 23cm DHR shows a Front to back ratio greater 
  23. than 30:1 with front to side ratios about the same.  This is a true 
  24. cannon. The main lobe is tight at 12 degrees both vertical and 
  25. horizontal. Matching is a bit difficult since micro-strip 
  26. knowledge is a must. Although the antenna is 50 ohms balanced, 
  27. the frequency demands exactness. This involves phasing elements, 
  28. stripline baluns, and hardline feeds. But for the 23 experimenter, 
  29. this antenna packs the punch of a large parabolic reflector and 
  30. in a small package.  I'll be giving the details in the next posting.
  31.  
  32.  
  33.  
  34.  
  35. -WS
  36.  
  37.  
  38.  
  39.